Rebar Coil Pay-off Stand
Application Scenarios: Rebar raw material yards, pre-processing zones by sheds, semi-finished storage, floor stacking points, bridge precast yards, shield segment factories.
Material & Process: Thick channel steel + large square tube full-welded frame, strong load-bearing without deformation; reinforced cantilever fits multiple specs; deburred edges, anti-rust paint for corrosion resistance.
Rebar Coil Pay-off Stand - Professional Construction Material Handling Solution
Hebei Xinjiuyi Construction Technology Co., Ltd. manufactures the Rebar Coil Pay-off Stand, an enterprise-grade storage and handling solution engineered for modern construction sites. Built with thickened channel steel and large square tube full-welded frames, this stand features a cannon-style structure designed to prevent rolling and tipping accidents. Our reinforced cantilever system accommodates multiple rebar specifications while maintaining strong load-bearing capacity without deformation. The standard dimensions are 2000 mm (length) × 1100 mm (width) × 1500 mm (height), with full customization available to match your project requirements. Every unit undergoes deburring processes and receives anti-rust paint coating for long-term durability in harsh outdoor environments.
Why Choose Our Rebar Storage Solution
Your construction site demands reliable material handling equipment that improves workflow efficiency and protects valuable inventory. Our Rebar Coil Pay-off Stand addresses these critical needs through intelligent engineering.
The cannon-style base design provides exceptional stability. You won't worry about coils rolling or tipping during transport or storage. This stability protects your workers and prevents material damage.
The off-ground design protects your rebar investment from moisture and ground contamination. This elevation keeps materials dry and reduces rust formation, extending the usable life of your steel inventory.
Standard lifting points are integrated into the frame structure. Your crane operators can safely relocate loaded stands without secondary rigging concerns, saving time on busy job sites.
Technical Specifications
| Parameter | Standard Size | Customization |
|---|---|---|
| Length | 2000 mm | Available |
| Width | 1100 mm | Available |
| Height | 1500 mm | Available |
| Frame Material | Thickened Channel Steel + Large Square Tube | Q235 Structural Steel |
| Construction Method | Full-Welded Frame | Reinforced Joints |
| Surface Treatment | Anti-Rust Paint Coating | Powder Coating Available |
| Load-Bearing Design | Reinforced Cantilever System | Multi-Specification Compatible |
| Edge Treatment | Fully Deburred | Worker Safety Focus |
Versatile Application Scenarios
Our Rebar Coil Pay-off Stand adapts to diverse construction environments. You can deploy these stands across multiple zones within your project site.
Raw Material Yards: Store incoming rebar coils immediately upon delivery. The classified storage system allows you to organize materials by specification, diameter, and grade.
Processing Shed Waiting Zones: Position stands near your straightening and cutting equipment. This placement reduces material handling time and streamlines your fabrication workflow.
Semi-Finished Storage Areas: Hold pre-cut rebar sections awaiting installation. The elevated design keeps finished materials clean and accessible for quality inspection.
Floor Stacking Points: Support vertical construction schedules by staging materials at designated floor levels. The compact footprint fits within typical material hoist loading zones.
Bridge Precast Yards: Manage heavy-duty rebar inventories for large-scale infrastructure projects. The reinforced cantilever handles the weight demands of bridge construction specifications.
Shield Segment Factories: Integrate into tunnel lining production workflows. The stable platform ensures consistent material feeding for automated fabrication systems.
Superior Material Construction
You receive proven engineering backed by quality materials. The frame construction uses thickened channel steel combined with large square tube sections, creating a full-welded structure that withstands daily job site demands.
The reinforced cantilever system is specifically engineered for strong load-bearing performance. This design prevents frame deformation even under maximum capacity loads, ensuring long-term dimensional stability.
Every welding joint receives full-penetration treatment. Our welding procedures follow standardized quality protocols, creating permanent connections that won't separate under stress.
Edge deburring is completed on all exposed steel surfaces. This process protects your workers from cut hazards during loading and unloading operations.
The anti-rust paint coating system provides corrosion resistance in harsh construction environments. This protective layer extends equipment lifespan even when exposed to rain, concrete wash, and chemical exposure.
Flexible Customization Services
Your project may require non-standard dimensions or special features. Xinjiuyi provides comprehensive customization support to match your exact specifications.
We work from your drawings to manufacture stands that fit unique site constraints. Whether you need extended cantilevers for larger coil diameters or modified heights for specific storage configurations, our engineering team delivers solutions.
Our selection guidance helps you determine the optimal specifications before ordering. You'll receive professional recommendations based on your material types, storage volumes, and site layout.
Production timelines remain efficient even for custom orders. Our advanced manufacturing facilities and mature supply chain management ensure fast delivery without compromising quality standards.
After-sales maintenance support continues throughout the equipment lifecycle. You can contact our technical team whenever questions arise about operation, relocation, or preventive maintenance procedures.
Frequently Asked Questions
Q: What load capacity can the item handle?
A: Our standard configuration safely supports rebar coils up to 2000 kg. Custom reinforcement options are available for heavier capacity requirements depending on your material specifications.
Q: Can the stand dimensions be modified for our existing storage layout?
A: Yes, we offer full customization of length, width, and height parameters. Provide your site measurements and material specifications, and we'll manufacture stands that integrate seamlessly into your workflow.
Q: How does the anti-rust coating perform in coastal construction environments?
A: The paint system provides reliable protection in standard outdoor conditions. For high-salt coastal projects, we recommend upgrading to powder coating for enhanced corrosion resistance.
Q: Are lifting points certified for crane operations?
A: The integrated lifting points are designed for safe rigging and transport. They accommodate standard crane hook configurations and support the fully-loaded weight of the stand plus materials.
Q: What maintenance is required to extend the stand's service life?
A: Inspect welds and coating condition every six months. Touch up any paint damage immediately to prevent rust propagation. Clean debris from cantilevers regularly to maintain proper material contact.
Q: Can we stack multiple stands when not in use?
A: The design does not support vertical stacking due to structural geometry. Stands should be stored horizontally in designated equipment areas to prevent frame damage.
Partner With Xinjiuyi for Complete Solutions
You gain more than equipment when you choose Hebei Xinjiuyi Construction Technology Co., Ltd. Our comprehensive project support includes design assistance, rapid production, and technical guidance throughout your construction timeline.
Located in Cangzhou's Xian County Development Zone, our modern manufacturing facilities ensure consistent quality across every production run. We maintain strict quality control systems that verify structural integrity before shipment.
Our commitment to construction site safety aligns with your operational goals. Every product reflects our philosophy: "Starting with user needs and ending with user satisfaction."
Contact Us Today
Email us at global@xjy8.com to discuss your specific requirements for Rebar Coil Pay-off Stand.
